2008
Table Of Contents
- Contents
- Part I Overview
- 01 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- Accessing AutoCAD Mechanical Commands
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor Companion Support
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 02 Commands in AutoCAD Mechanical
- 03 New and Revised Commands
- 01 About AutoCAD Mechanical
- Part II Design and Annotation Tools
- 04 Working with Templates
- 05 Using Mechanical Structure
- 06 Working with Layers and Layer Groups
- 07 Designing Levers
- 08 Working with Model Space and Layouts
- 09 Dimensioning
- 10 Working with 2D Hide and 2D Steel Shapes
- 11 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 12 Working with BOMs and Parts Lists
- 13 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- 14 Calculating Shafts
- Part III Engineering Calculations
- Part IV Autodesk Inventor Link
- Appendix A Layer Specifications
- Appendix B Title Block Attributes
- Appendix C Accelerator and Shortcut Keys
- Index
BaseLineweightLinetypeColorNameDescription
noISO:
0.25mm/ANSI:
0.15mm=0.006’
ISO: Continuous
ANSI: Continuous
1AM_8Hatch
no0ISO: Continuous253AM_9Behind
ANSI: Continuous
noISO: 0.5mm/AN-
SI:
0.3mm=0.012’
ISO:
AM_ISO08W050
ANSI: Center
7AM_10Section Line
noISO:
0.25mm/ANSI:
0.15mm=0.006’
ISO:
AM_ISO09W050
ANSI: Phantom2
3AM_11Phantom
noISO: 0.5mm/AN-
SI:
0.3mm=0.012’
ISO: Continuous
ANSI: Continuous
7AM_12Part Reference
Objects
noISO: 0.5mm/AN-
SI:
0.3mm=0.012’
ISO: Continuous
ANSI: Continuous
7AM_0NStd. Parts: Con-
tour
noISO: 0.5mm/AN-
SI:
0.3mm=0.012’
ISO: Continuous
ANSI: Continuous
14AM_1NStd. Parts: Con-
tour
noISO: 0.5mm/AN-
SI:
0.3mm=0.012’
ISO: Continuous
ANSI: Continuous
5AM_2NStd. Parts: Con-
tour
noISO:
0.25mm/ANSI:
0.15mm=0.006’
ISO:
AM_ISO02W050
ANSI: Hidden
6AM_3NStd. Parts: Hid-
den
Layer Specification Listing | 449