2008

Table Of Contents
3 Respond to the prompts as follows:
(SINGLE) Specify first extension line origin or
[Angular/Options/Baseline/Chain/ Update] <Select>:
Select the first corner point of the lever opening (1)
Specify second extension line origin:
Select the second corner point (2)
Specify dimension line location or [Options/Pickobj]:
Drag the dimension line to the left until it is highlighted in red, click (3)
4 In the Power Dimensioning dialog box, click the Add Tolerance icon and
specify:
Deviation: Upper: 0.1
Deviation: Lower: 0
Precision: Primary: 1
Choose OK.
5 Press ENTER twice to finish the command.
The lever looks like this:
Dimensioning Contours | 145