2008

Table Of Contents
If you started the command using the menu, the Construction Lines
dialog box is displayed.
7 In the Construction Lines dialog box, choose the Circle Tangent to 2
Lines icon.
8 Draw the two circles by responding to the prompts as follows:
Select first tangent: Select tangent point (1)
Select second tangent: Select tangent point (2)
Specify diameter: Enter 2, press ENTER
Select first tangent: Select tangent point (3)
Select second tangent: Select tangent point (4)
Specify diameter <2>: Enter 2, press ENTER
9 Press ENTER to end the command.
All construction lines have been inserted, and the contour can be
generated.
Creating additional C-Lines | 137