2010

Table Of Contents
Drag the dimension line to the right until it is highlighted in red and click (3)
3 In the Power Dimensioning dialog box, click OK.
4 Press ENTER twice to exit the command.
NOTE Parametric dimensions and reference dimensions are shown in different
colors.
To create a radial reference dimension
1 Start the power dimensioning command.
Ribbon
Annotate tab Dimension panel
Annotate Power Dimension
Menu
AMPOWERDIMCommand
2 Respond to the prompts as follows:
Specify first extension line origin or
[Linear/Angular/Radial/Baseline/ Chain/Options/Update] <select
object>: Press ENTER
Select arc, circle, line or dimension:
390 | Chapter 19 Using Autodesk Inventor Link Support