2010

Table Of Contents
Starting Cam Designs and Calculations
To start a cam design and calculation
1 Open the cam design and calculation tool.
Ribbon
Content tab Calculation panel drop-down
Cam Design and Calculation.
Content Cams...
Menu
AMCAMCommand
Specify the cam type.
2 In the Cam Design and Calculation dialog box, on the Cam tab, specify:
Type: Circular
In the Type of Cam dialog box, click the center Circular icon and specify:
Revolutions [1/min]: 100
Drawn: Select the check box
Diameter of Body [mm]: 50
3 Click the Follower button.
NOTE You can also step through the dialog using the Next button.
4 On the Follower tab, Movement section, click the Translating button.
Starting Cam Designs and Calculations | 355