2010

Table Of Contents
Selecting and Specifying Washers
In the Definition of WASHERS section of the screw calculation, you can select
the washer standard and size and the positions of the washers.
To specify a washer
1 On the Washer under: Head 1 tab, clear the Washer check box.
2 Click the Nut 1 tab, and then click the Table of Washers button.
3 In the Select a Washer dialog box, choose ISO 7091.
Specify the plates.
4 Click Next.
Specifying Plate Geometry and Properties
In the Definition of PLATES section of the screw calculation, you can select
plate materials and their geometric properties.
Selecting and Specifying Washers | 329