2010
Table Of Contents
- Contents
- Part 1 Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Part 2 Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Part 3 Engineering Calculations
- Part 4 Autodesk Inventor Link
- Index
Specify interior point: Press ENTER
Is the area filled correctly? (Yes/No)? <Yes>: Press ENTER
The coordinates of the centroid and the moment of inertia along the
principle axes are displayed on the command line, as follows:
Coordinates of centroid (in user coordinates):
X coordinate: 228.071933 Y coordinate: 150.027674
Moments of inertia along principal axes:
I1: 2.359e+004 I2: 1.4095e+004
Axis angle for major moment (I1): 5.3
Define the direction of the loads. They must be in one plane.
3 Respond to the prompts as follows:
Specify direction of load forces (must all lie in one plane):
Enter 270, press ENTER
The data for this load direction is displayed on the command line, as
follows:
Effective moment of inertia for this load direction: 2.341e+004
Angle of deflection: 266.5
Maximum distances neutral line - border:
Extension side: 16.690 Compression side: 14.444
Enter a description for the calculated profile and locate the block with
the calculation data in the drawing.
4 Respond to the prompts as follows:
Enter description: Enter Frame Profile, press ENTER
Specify insertion point: Place the calculation block next to the profile
Your drawing looks like this:
288 | Chapter 13 Calculating Moments of Inertia and Deflection Lines