2010
Table Of Contents
- Contents
- Part 1 Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Part 2 Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Part 3 Engineering Calculations
- Part 4 Autodesk Inventor Link
- Index
Click OK.
You return to the Shaft Generator dialog box.
Creating Cylindrical Shaft Sections and Gears
The shaft generator is configured. Now you want to generate the first shaft
segments. Verify that the Outer Contour tab is selected.
To create shaft segments
1
Click the lower cylinder button to define a cylinder section, and
respond to the prompts as follows:
Specify length <50>: Enter 12, press ENTER
Specify diameter <40>: Enter 20, press ENTER
2
Click the gear button, and then enter the values for module,
number of teeth, and length as shown in the following figure:
252 | Chapter 11 Creating Shafts with Standard Parts