2010
Table Of Contents
- Contents
- Part 1 Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Part 2 Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Part 3 Engineering Calculations
- Part 4 Autodesk Inventor Link
- Index
DescriptionCommand NameIcon
Creates concentric pitch circles and places a
specified number of holes on them, distributed
uniformly.
AMCENCRFULLCIRCLE
Places a hole at a specified point.AMCENCRHOLE
Places a centerline cross on a circle.AMCENCRINHOLE
Places a centerline cross at a specified point.AMCENCROSS
Places holes at the corners of a closed contour
that represents a plate.
AMCENCRPLATE
Draws a centerline in between two lines to
mark them as symmetrical.
AMCENINBET
Inserts a centerhole from the content library.AMCENTERHOLE2D
Draws a centerline at a specified place in the
drawing area.
AMCENTLINE
Draws a chain or belt links along a polyline.AMCHAINDRAW
Calculates the required length of a chain or
belt when you trace the path of the chain or
belt.
AMCHAINLENGTHCAL
Connects two non-parallel objects by extend-
ing or trimming them to intersect or to join
with a beveled line.
AMCHAM2D
Command Summary | 17