2010

Table Of Contents
Specify first extension line origin or
[Linear/Angular/Radial/Baseline/Chain/Options/Update] <select
object>:
Select the first edge of the hole (1)
Specify second extension line origin:
Select the second edge of the hole (2)
Specify dimension line location or
[Horizontal/Vertical/Aligned/Rotated/Placement options]:
Drag the dimension line toward point 3 until it turns red, and then click
4 In the Power Dimensioning dialog box, Click OK.
5 Continue to respond to the prompts as follows:
Specify first extension line origin or
[Linear/Angular/Radial/Baseline/Chain/Options/Update] <select
object>: Press ENTER
Select arc, line, circle or dimension: Press ENTER
The viewport looks like this:
Inserting Holes Within Viewports | 137