2010

Table Of Contents
9 Press ESC to cancel the command.
The triangular contour is complete.
Save your file.
Trimming Projecting Edges on Contours
Now, you create another part of the contour and trim projecting edges.
To edit a contour
1 Activate Power Snap Setting 3 command.
Ribbon None.
Object Snap Cursor Menu Power Snap Settings
1-4 ... Power Snap Configuration 3
Tools Drafting Settings Power Snap Config-
uration 3
Menu
AMPSNAP3Command
Next, insert the next contour.
2 Start the Line command.
Ribbon
Home tab Draw panel Line.
Draw Line
Menu
LINECommand
3 Respond to the prompts as follows:
Specify first point:
Hold down the SHIFT key, right-click, and choose Intersection from the menu
Trimming Projecting Edges on Contours | 113