2010
Table Of Contents
- Contents
- Part 1 Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Part 2 Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Part 3 Engineering Calculations
- Part 4 Autodesk Inventor Link
- Index
4 Apply a fillet to the corner of the triangle.
Ribbon
Home tab ➤ Modify panel ➤ Fillet.
Modify ➤ Fillet
Menu
AMFILLET2DCommand
5 Respond to the prompts as follows:
(Dimension mode:OFF)(Trim mode) Current fillet radius = 2.5
Select first object or [Polyline/Setup/Dimension] <Setup>:
Press ENTER. The Fillet dialog box is displayed.
6 In the Fillet size list, select 1.
7 Select the Trim Geometry check box:
Click OK.
8 Respond to the prompts as follows:
(Dimension mode:OFF)(Trim mode) Current fillet radius = 1
Select first object or [Polyline/Setup/Dimension] <Setup>:
Enter P, press ENTER
Select polyline: Select a point on the polyline near the corner
112 | Chapter 5 Designing Levers