2010
Table Of Contents
- Contents
- Part 1 Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Part 2 Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Part 3 Engineering Calculations
- Part 4 Autodesk Inventor Link
- Index
9 Press ENTER.
Save your file.
Creating additional C-Lines
AutoCAD Mechanical offers a large choice of C-line options.
To create additional construction lines
1 Activate snap setting 2.
Ribbon None.
Object Snap Cursor Menu ➤ Power Snap Settings
1-4 ... ➤ Power Snap Configuration 2
Tools ➤ Drafting Settings ➤ Power Snap Config-
uration 2
Menu
AMPSNAP2Command
2 Start the Draw Construction Lines command.
Ribbon
Home tab ➤ Draw Tools panel ➤ Construction
Lines.
Draw ➤ Construction Lines ➤ Draw Construction
Lines...
Menu
AMCONSTLINESCommand
The Construction Lines dialog box is displayed.
3 In the Construction Lines dialog box, choose the option next to the
Construction line by defining two points or an angle icon shown below,
and click OK.
4 Respond to the prompts as follows:
Specify first point: Select the first point (1)
Specify second point or Angle (xx|xx|xx..) <30|45|60>:
108 | Chapter 5 Designing Levers