2009
Table Of Contents
- Contents
- Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Engineering Calculations
- Autodesk Inventor Link
- Index
To create a base view and orthogonal view
1 On the command line, AMDWGVIEW command.
2 In the Create Drawing View dialog box, specify:
View Type: Multiple
Data Set: Select
Layout: Layout2
Scale: 1.5
Display Hidden Lines: Clear the check box
3 Choose OK.
4 Respond to the prompt as follows:
Select planar face, work plane or
[sTandard view/Ucs/View/worldXy/worldYz/worldZx]: Enter X
Select work axis, straight edge or [worldX/worldY/worldZ]:
Enter X
Adjust orientation [Flip/Rotate] <Accept>: Press ENTER
Specify location of base view:
Position the view in the lower left corner of the graphics area and click
Specify location of base view or [Done] <next view>: Press ENTER
Specify location of projected view or [New parent view]:
Drag to a location above the base view, click to select location
Specify location of projected view or [Done] <next view>:
Press ENTER
Specify location of projected view or [New parent view]:
Press ENTER
388 | Chapter 19 Using Autodesk Inventor Link Support