2009

Table Of Contents
Refining Designs
The results show a critical area around point 8 that can be improved by
applying a larger radius. Before changing the geometry, the results and
solutions have to be deleted.
To edit the geometry
1 Click the Delete Solution button.
2 In the AutoCAD Question dialog box, click Yes to delete the solutions
and results.
3 In the AutoCAD Question dialog box, click No to keep the loads and
supports.
4 To start Power Edit to change the radius, on the command line, enter
AMPOWEREDIT and respond to the prompt as follows:
Select object: Select the arc segment at point 8
5
6 In the Fillet dialog box, specify:
Fillet Size: 10
Click OK.
336 | Chapter 17 Calculating Stress Using FEA