2009
Table Of Contents
- Contents
- Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Engineering Calculations
- Autodesk Inventor Link
- Index
Inserting Chains
To insert a chain
1 Start the Draw Chain/Belt Links command. On the command line, enter
AMCHAINDRAW.
2 In the Select Belt and Chain dialog box, Details panel, click Chains.
Respond to the prompts:
Select polyline: Select the polyline near point 9
Select starting point on polyline: Select a point on the polyline
3 In the Select a Chain dialog box, select ISO 606 Metric.
4 In the Chains - Size Selection dialog box, select ISO 606 05B - 1, and then
click Next.
5 In the Chains - Geometry selection dialog box, specify:
Number of Links: 121
Click Finish.
6 Respond to the prompts:
Specify direction of Links [Flip/Accept] <Accept>: Press ENTER
Specify orientation of Links [Flip/Accept] <Accept>:
Enter F, press ENTER
Specify orientation of Links [Flip/Accept] <Accept>: Press ENTER
296 | Chapter 14 Calculating Chains