2009
Table Of Contents
- Contents
- Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Engineering Calculations
- Autodesk Inventor Link
- Index
DescriptionCommand NameToolbut-
ton
Rounds and fillets the edges of objects.AMFILLET2D
Puts existing fits and their respective dimen-
sion values into a list and inserts this fits list
into your drawing.
AMFITSLIST
Inserts a retaining ring/circlip with the appro-
priate groove in a shaft.
AMGROOVE2D
Creates a grooved drive stud.AMGROOVESTUD2D
Creates a 135-degree and 11 mm/0.4 inch
hatch.
AMHATCH_135_11
Creates a 135-degree and 2.7 mm/0.11 inch
hatch.
AMHATCH_135_2
Creates a 135-degree and 4.7 mm/0.19 inch
hatch.
AMHATCH_135_4
Creates a 45-degree and 13 mm/0.5 inch
hatch.
AMHATCH_45_13
Creates a 45-degree and 2.5 mm/0.1 inch
hatch.
AMHATCH_45_2
Creates a 45-degree and 5 mm/0.22 inch
hatch.
AMHATCH_45_5
22 | Chapter 2 Commands in AutoCAD Mechanical