2009
Table Of Contents
- Contents
- Overview
- 1 About AutoCAD Mechanical
- AutoCAD Mechanical Software Package
- Leveraging Legacy Data
- Starting AutoCAD Mechanical
- AutoCAD Mechanical Help
- Product Support and Training Resources
- Design Features in AutoCAD Mechanical
- Mechanical Structure
- Associative Design and Detailing
- External References for Mechanical Structure
- Associative 2D Hide
- Autodesk Inventor link
- 2D Design Productivity
- Engineering Calculations
- Machinery Systems Generators
- Intelligent Production Drawing and Detailing
- Detailing Productivity
- Annotations
- Standard Mechanical Content
- Standard Parts Tools
- Collaboration
- 2 Commands in AutoCAD Mechanical
- 1 About AutoCAD Mechanical
- Design and Annotation Tools
- 3 Working with Templates
- 4 Using Mechanical Structure
- 5 Designing Levers
- 6 Working with Model Space and Layouts
- 7 Dimensioning
- 8 Working with 2D Hide and 2D Steel Shapes
- 9 Working with Standard Parts
- Key Terms
- Working with Standard Parts
- Inserting Screw Connections
- Copying Screw Connections with Power Copy
- Creating Screw Templates
- Editing Screw Connections with Power Edit
- Working with Power View
- Deleting with Power Erase
- Inserting Holes
- Inserting Pins
- Turning Off Centerlines in Configurations
- Hiding Construction Lines
- Simplifying Representations of Standard Parts
- 10 Working with BOMs and Parts Lists
- 11 Creating Shafts with Standard Parts
- Key Terms
- Creating Shafts
- Configuring Snap Options
- Configuring Shaft Generators
- Creating Cylindrical Shaft Sections and Gears
- Inserting Spline Profiles
- Inserting Chamfers and Fillets
- Inserting Shaft Breaks
- Creating Side Views of Shafts
- Inserting Threads on Shafts
- Editing Shafts and Inserting Sections
- Replacing Shaft Sections
- Inserting Bearings
- Engineering Calculations
- Autodesk Inventor Link
- Index
6 Respond to the prompts as follows:
Select objects for background:
Select the square hollow section on the left
Select objects for background:
Select the square hollow section on the right
Select objects for background: Press ENTER
7 In the Modify Hide Situation dialog box, click Preview.
Your drawing looks like this:
8 Respond to the prompts:
Accept preview and exit command [Yes/No] <Yes>: Press ENTER
Edit the behind situation [modifY/Move/Restore/Genius12]
<Update>: Press ENTER
Select objects: Press ENTER
The 2D hide situation is corrected.
Save your file.
Copying and Moving 2D Hide Situations
If you copy or move assemblies that contain 2D hide situations, the 2D hide
information is not lost.
Copy the girder assembly.
To copy a 2D hide situation
1 Select the I-shaped girder and the two square hollow sections.
2 Right-click the graphics area background, and then choose Copy with
Base Point.
Respond to the prompt as follows:
Specify base point: Select point P3
162 | Chapter 8 Working with 2D Hide and 2D Steel Shapes