2009

Table Of Contents
9 Respond to the prompt as follows:
Accept preview and exit command [Yes/No] <Yes>: Press ENTER
The 2D hide situation is defined correctly, and you can proceed with
your drawing.
Save your file under a different name or to a different directory to preserve
the original tutorial file.
Inserting 2D Steel Shapes
Steel Shapes can easily be inserted through a selection dialog box, where you
can define the standard, profile, size, and length of the steel shape.
Insert a steel shape with a square hollow section on the left edge of the I-shaped
girder.
To insert a 2D steel shape
1 Start the Zoom All command. On the command line, enter ZOOM.
2 Start the Steel Shape command. On the command line, enter
AMSTLSHAP2D
156 | Chapter 8 Working with 2D Hide and 2D Steel Shapes