6.0

Table Of Contents
68 | Chapter 6 Creating Parametric Sketches
Use Pan to center PART3_1 on your screen.
PART3_1 contains an unsolved sketch of line segments and arcs.
To create a 3D pipe path
1 Use
AM3DPATH to define the 3D pipe path, responding to the prompts.
Context Menu In the graphics area, right-click and choose Sketch Solving
3D Pipe Path.
Select polyline path source: Select the first line (1)
Select polyline path source: Select the remaining arcs and lines in sequence
Select polyline path source: Press ENTER
Specify start point: Specify a point near the start of the first line (1)
The command method you use determines the prompts that are displayed.
1