6.0

Table Of Contents
Joining Surfaces on Complex Shapes | 643
5 Use AMJOIN3D to combine three polyline segments.
Desktop Menu Surface Edit Wireframe Join
In the Join3D dialog box, specify:
Mode: Automatic
Output: Polyline
Gap Tolerance: Enter .004
Choose OK.
6 Respond to the prompts as follows:
Select start wire or: Select polyline (1)
Select wires to join: Select wire (2)
Select wires to join: Select wire (3) and press
ENTER
Reverse direction? [Yes/No] <No>: Press ENTER
The segments are joined together. Later, you will project the joined line onto
the top surface.
1
2
3
2
1