6.0

Creating Trimmed Planar Surfaces | 627
Select wires: Select wire (1) and press ENTER
A planar surface, trimmed to the boundary of wire (1), is created on the top
of the model.
To sweep a surface on two wires and two rails
1 Use
AMSWEEPSF to create the top B surface, responding to the prompts.
Desktop Menu Surface ➤ Create Surface ➤ Sweep
Select cross sections: Select wire (2)
Select cross sections: Select wire (3) and press ENTER
Select rails: Select wire (4)
Select rails: Select wire (5)
In the Sweep Surface dialog box, specify:
Transition: Scale
Keep Original Wire: Check the check box
Choose OK.
1
2
4
3
5
6
7