6.0

Table Of Contents
584 | Chapter 20 Combining Parts and Surfaces
5 Continue on the command line.
Select first object: Select the work point
Select second object or place dimension:
Select the bottom edge of the camera body
Specify dimension placement: Place the vertical dimension
Enter dimension value or [Undo/Hor/Ver/Align/Par/aNgle/Ord/Diameter/pLace]
<0.8898>: Enter 1
Solved fully constrained sketch.
Select first object: Press
ENTER
The work point is fully constrained.
Save your file.
Cutting Parts with Surfaces
Now that the surface is positioned relative to the camera body, you can use
it to cut away material from the planar camera face.
To cut away from a part
1 Use
AMSURFCUT to create a surface cut, responding to the prompts.
Context Menu In the graphics area, right-click and choose Placed
Features Surface Cut.
(Type: Cut)
Select surface or [Type]: Select the surface
Select work point: Select the work point
Specify portion to remove: [Flip/Accept] <Accept>:
Verify the direction arrow points away from the camera body and press
ENTER