6.0

Creating Derived Surfaces | 561
3 Create the third blended surface, responding to the prompts.
Desktop Menu Surface ➤ Create Surface ➤ Blend
Select first wire: Select surface (5)
Select second wire: Select surface (6)
Select third wire [Weights]: Press ENTER
4 Use ZOOM to enlarge the corner area created by the blended surfaces.
5 Use
AMBLEND to create a corner blended surface, responding to the prompts.
Desktop Menu Surface ➤ Create Surface ➤ Blend.
Select first wire: Select surface (7)
Enter an option [next/Accept] <Accept>: Press
ENTER
Select second wire: Select surface (8)
Enter an option [next/Accept] <Accept>: Press
ENTER
Select third wire [Weights]: Select surface (9)
Select fourth wire: Press
ENTER
The order in which you select the objects to blend determines the orientation
of the corner created by the blend.
5
6
7
8
9