6.0

Table Of Contents
Completing Assemblies | 499
2 Constrain DPULLEY to WASHER3, responding to the prompts.
Context Menu In the graphics area, right-click and choose 3D
Constraints Insert.
Select first circular edge: Specify inner edge of hole on DPULLEY (1)
First set = Plane/Axis
Enter an option [Clear/Flip] <accept>: Enter f
First set = Plane/Axis
Enter an option [Clear/Flip] <accept>: Press
ENTER
Select second circular edge: Specify the top cylindrical edge of WASHER3 (2)
Second set = Plane/Axis
Enter an option [Clear/Flip] <accept>: Press
ENTER
Offset <0.0000>: Press ENTER
The DPULLEY part is constrained to WASHER3 along the common axes and
mating planes.
1
2