6.0

Creating New Parts | 493
3 Continue placing two more holes concentric to the remaining arcs. Then
press
ENTER.
The drilled holes are added and cut through the pulley plate. Later, you check
for interference and modify the diameter of the holes.
4 Use
AMFILLET to fillet the pulley plate edges.
Context Menu In the graphics area, right-click and choose Placed
Features ➤ Fillet.
In the Fillet dialog box, select the Constant check box and specify:
Radius: Enter 1
Return to dialog: Clear the check box
Choose OK.
5 Respond to the prompts as follows:
Select edges or faces to fillet: Select the pulley plate top edge (1)
Select edges or faces to fillet: Select the pulley plate bottom edge (2)
Select edges or faces to fillet: Press
ENTER
The pulley plate edges are filleted.
Now that the pulley plate is complete, you have all the parts you need to
build the subassembly.
Save your file, but do not close it. You will make some changes to it later.
1
2