6.0

Adding Weight Reduction Holes | 467
The weight reduction holes are very close to the relief cut. For balance, the
holes must remain centered in the spacer. To provide enough material
between the holes and the relief, you need to reduce the depth of the relief
and the diameter of the holes.
To make the change, you edit the nested relief cylinder toolbody and reduce
its extrusion distance.
NOTE When you edit more complex parts, it is sometimes easier to select
commands from menus or toolbars instead of searching for the feature in the
Browser and using the Browser menus.
To center the weight reduction holes
1 Return to wireframe display.
Desktop Menu View ➤ Shade ➤ 2D Wireframe, and then View ➤ Regen
2 Use
AMEDITFEAT to recover the relief toolbody, responding to the prompts.
Context Menu In the graphics area, right-click and choose Edit Features ➤
Edit.
Enter an option [Independent array instance/Sketch/surfCut/Toolbody/select
Feature] <select Feature>: Enter t
Select parametric boolean to edit: Select the edge of the relief toolbody (1)
Enter an option [Accept/Next] <Accept>:
When the relief toolbody is highlighted, press
ENTER
1