6.0

Table Of Contents
Creating Revolved Features | 287
To constrain a profile sketch to revolve
1 Use
AMDIMDSP to change the dimension display to numbers.
Context Menu In the graphics area, right-click and choose Dimensioning
Dimensions as Numbers.
2 Use
AMPARDIM to dimension the length and width of the sketch, following
the prompts.
Context Menu In the graphics area, right-click and choose Dimensioning
New Dimension.
Select first object: Specify the line (1)
Select second object or place dimension: Place the dimension (2)
Enter dimension value or [Undo/Hor/Ver/Align/Par/aNgle/Ord/Diameter/pLace]
<0.3629>: Enter .33
Solved underconstrained sketch requiring 3 dimensions or constraints.
Select first object: Specify the line (3)
Select second object or place dimension: Place the dimension (4)
Enter dimension value or [Undo/Hor/Ver/Align/Par/aNgle/Ord/Diameter/pLace]
<0.6687>: Enter .78
Solved underconstrained sketch requiring 2 dimensions or constraints.
Select first object: Press
ENTER
In the right viewport, constrain the sketch to the part as follows:
Make the bottom line of the sketch collinear with the bottom of the part.
Make the right side of the rectangle collinear with the vertical work axis
so that it serves as the axis of revolution of the feature.
1
3
2
4