6.0

Creating Extruded Features | 273
2 Select the arcs to constrain, following the prompts.
Context Menu In the graphics area, right-click and choose 2D
Constraints ➤ Radius.
Valid selection(s): arc or circle
Select object to be resized: Select the arc at the top of the sketch (1)
Valid selection(s): arc or circle
Select object radius is based on: Select the arc at the bottom of the sketch (2)
Solved underconstrained sketch requiring 9 dimensions or constraints.
3 Add radial constraints to the left and right arcs to make them equal in size.
Valid selection(s): arc or circle
Select object to be resized: Select the arc at the right of the sketch (3)
Valid selection(s): arc or circle
Select object radius is based on: Select the arc at the left of the sketch (4)
Solved underconstrained sketch requiring 8 dimensions or constraints.
Your left viewport should look like this.
If you sketched in a different order, your arcs and lines may be numbered
differently.
Valid selection(s): arc or circle
Select object to be resized: Press
ENTER
Enter an option
[Hor/Ver/PErp/PAr/Tan/CL/CN/PRoj/Join/XValue/YValue/Radius/Length/Mir/Fix/
eXit] <eXit>: Press
ENTER
1
3
4
2