6.0

Table Of Contents
Editing Fillet Features | 203
To edit a fillet
1 Use
AMEDITFEAT to modify the cubic fillet, responding to the prompts.
Context Menu In the graphics area, right-click and choose Edit Features
Edit.
Enter an option [Sketch/surfCut/Toolbody/select Feature] <select Feature>:
Specify Fillet4
Enter an option [Next/Accept] <Accept>:
Enter n to cycle to Fillet4 or press
ENTER
Select object: Specify the .1 radius
Enter Radius <0.100000000>: Enter .5 and press
ENTER
Select object: Specify the original .5 radius
Enter Radius <0.500000000>: Enter .1 and press ENTER
Select object: Press ENTER
2 Use AMUPDATE to update the part, responding to the prompt.
Context Menu In the graphics area, right-click and choose Update Part.
Your part should look like this.
Save your file.
Delete some or all of the fillets you created in these procedures, and replace
them with your own fillets to change the shape of your part.