6.0

Table Of Contents
200 | Chapter 10 Creating Placed Features
2 Continue on the command line.
Select edges or faces to fillet: Specify an edge (1)
Select edges or faces to fillet: Specify an edge (2), and press
ENTER
The fillets are applied to your part.
Next, create a fixed width fillet where the cylindrical extrusion meets the
angled face.
To create a fixed width fillet
1 Use AMFILLET to create a fixed width fillet.
Context Menu In the graphics area, right-click and choose Placed
Features Fillet.
In the Fillet dialog box, choose Fixed Width and specify a chord length of .1.
Then choose OK.
2 Continue on the command line.
Select edges: Specify the circular edge on the angled face
1
2