6.0

Table Of Contents
Using Construction Geometry | 113
To check for and add missing constraints
1 Use
AMSHOWCON to check for constraints that are still needed.
Context Menu In the graphics area, right-click and choose 2D
Constraints Show Constraints.
2 Display all the constraints and press
ENTER to exit the command.
3 Use
AMADDCON to add constraints and dimensions to the sketch, following
the prompts.
Context Menu In the graphics area, right-click and choose Dimensioning
New Dimension.
Select first object: Specify the upper left arc (1)
Select second object or place dimension:
Specify the vertical line on the left below its midpoint (2)
Specify dimension placement: Specify a point to the left of the sketch (3)
Enter dimension value or [Undo/Hor/Ver/Align/Par/aNgle/Ord/Diameter/pLace]
<3.1069>: Enter 3
Solved under constrained sketch requiring 5 dimensions or constraints.
4 Add a second dimension.
Select first object: Specify the upper left arc (1)
Select second object or place dimension:
Specify a point above and left of sketch (4)
Enter dimension value or [Undo/Diameter/Ordinate/Placement point]
<0.2788>: Enter .25
Solved under constrained sketch requiring 4 dimensions or constraints.
Select first object: Press
ENTER
Next, you fully solve the path by adding 2D constraints.
2
1
4
3