6.0

Table Of Contents
Applying Dimension Constraints | 103
2 Use AMPARDIM to dimension the leftmost arc, responding to the prompts.
Context Menu In the graphics area, right-click and choose Dimensioning
New Dimension.
Select first object: Specify the lower arc
Select second object or place dimension: Place the dimension
Enter dimension value or [Undo/Diameter/Ordinate/Placement point]
<0.3687>: Enter .4
Solved under constrained sketch requiring 2 dimensions or constraints.
After you enter the new radius value, the arcs are updated because the radius
constraint makes both arcs equal.
3 Add the final two dimensions by responding to the prompts as follows:
Select first object: Specify the line (1)
Select second object or place dimension: Place the dimension (2)
Enter dimension value or [Undo/Hor/Ver/Align/Par/aNgle/Ord/Diameter/pLace]
<0.8753>: Enter .75
Solved under constrained sketch requiring 2 dimensions or constraints.
Select first object: Specify near the middle of line (1)
Select second object or place dimension: Specify near the middle of line (3)
Specify dimension placement: Place the dimension (4)
Enter dimension value or [Undo/Placement point] <138>: Enter 135
Solved fully constrained sketch.
Select first object: Press
ENTER
2
3
1
4