2011

To edit the fill property for the polygon object
1 At the Command prompt, enter
mapmpedit (page 1818).
2 Select the polygon to edit.
3 Enter f.
4 In the
Polygon Fill Properties dialog box (page 1824), edit the polygon fill
properties. These properties are applied to the polygon that you are
editing.
Do this in the Polygon Fill Properties dialog box...To fill with...
Solid
■ Click the Hatch tab.
■ For Pattern Type, select Predefined.
■ For Pattern Name, select Solid.
■ For Fill Color, select the fill color. Click Select Color
to select from a large palette of colors.
Predefined hatch pattern
■ Click the Hatch tab.
■ For Pattern Type, select Predefined.
■ For Pattern Name, select a pattern.
User defined hatch pattern
■ Click the Hatch tab.
■ For Pattern Type, select User Defined.
■ Specify the angle and spacing of the hatch pattern.
One or two color gradient
■ Click the Gradient tab.
■ Select the number of colors to use for your gradient
fill.
■ Select the colors.
■ Use the Shade/Tint slider to adjust the color.
■ Click a pattern.
■ Select Center to create a symmetrical fill, or clear
Center to move the "highlight" up and to the left.
■ Specify an angle for the "highlighted" area.
966 | Chapter 6 Creating and Editing Data