2011

4 On the Drawing Cleanup - Select Objects Page (page 1595), click Select All.
You can specify the layer(s) you want to use, for example, the layer
containing road data, and anchor objects as needed. Click Next.
5 On the
Select Actions Page (page 1588), in the Cleanup Actions list, click
Snap Clustered Nodes and then click Add.
6 In the Selected Actions list, click Snap Clustered Nodes. Under Cleanup
Parameters, set Tolerance to a value just greater than the offset distance
between objects. You can type a value in the Tolerance box or click Pick
to specify the tolerance in the drawing.
7 Under Options, choose Automatically. Click Next.
8 In the Cleanup Methods Page, under Cleanup Method, select Modify
Original Objects.
9 You can
save your settings in a profile (page 781) to use again later.
10 Click Finish to start the drawing cleanup operation.
11 In the Confirm Save Back dialog box, click Yes.
The objects are now contiguous across the map edges. Repeat steps 4 -
11 for all other layers and objects in the edge matching part of the maps.
To save the edited objects back to the source drawings
1 Click Home tab ➤ Data panel ➤ ➤ Save To Source.
2 Under What To Save, make sure Save Queried Objects is selected. Click
OK.
All the objects are now matched at their edges.
Quick Reference
MAPCLEAN
Performs drawing cleanup operations
Modify menu ➤ Drawing Cleanup
Menu
Drawing Cleanup
Icon
952 | Chapter 6 Creating and Editing Data