2011

Table Of Contents
5 Under Objects To Trim, specify whether to select objects manually or
automatically, and whether to use only objects on selected layers.
6 Under Trim Method, specify whether to trim inside or outside the
boundary. Specify whether to exclude topology objects, and whether to
retain object data on the objects.
If you select Retain Object Data, object data and external link data is
duplicated on each piece of a trimmed object. If data is not retained, it
remains attached only to the original location.
7 Under Objects That Cannot Be Trimmed, specify what to do with text,
hatch patterns, and blocks that cross the boundary.
8 Click OK.
9 To save the trim with your topology, save your changes back to the source
drawings.
To save the trim results without modifying the original topology, save
the changes to a new drawing.
Quick Reference
MAPTRIM
Trims objects to a set of edges
Modify menu Boundary Trim
Menu
Boundary Trim
Icon
MAPTRIMCommand Line
Trim Objects At Boundary dialog boxDialog Box
Manually Editing Objects
Although the automatic AutoCAD Map 3D editing tools can correct many
problems, you may need to edit a drawing manually. Use commands such as
FILLET, TRIM, and EXTEND to correct situations like those shown in the
following illustration.
946 | Chapter 6 Creating and Editing Data