2011

NOTE This functionality is for drawing objects only. There is no equivalent for
geospatial feature data.
If you retrieved data from source drawings, you can save back the topology
information to the source drawings, and also save the current drawing. Future
work with the topology should be done in the current drawing with the source
drawings active and attached. This method ensures that complete and correct
object data associated with the topology is available.
See also:
■
Loading or Unloading Topologies (page 906)
■ Adding an Object to the Save Set (page 750)
■ Saving New Objects to Attached Drawings (page 754)
■ Saving Objects to the Current Drawing (page 756)
NOTE This procedure is for drawing objects only. There is no equivalent for
geospatial feature data.
To save topology to source drawings
1 Click Home tab ➤ Data panel ➤
➤ Add To Save Set.
2 Use any selection method to add the topology objects to the save set.
3 Click Home tab ➤ Data panel ➤
➤ Save To Source.
4 In the Save Objects to Source Drawings dialog box (page 1887), under What
To Save, make sure Save Queried Objects is selected.
If you created new node or centroid objects, or if you added objects to a
topology, also select Save Newly Created Objects.
5 If you are saving new objects, select a save order.
6 Click OK.
Quick Reference
ADESAVEOBJS
Creating, Editing, and Managing Topologies | 917