2011

You can also view and edit data associated with the objects in a topology using
the Properties palette. For example, for a link in a network topology, you can
view general information about the link, such as the ID of the start and end
nodes, and you can edit specific information such as the direction, direct
resistance, and reverse resistance of a link.
See also:
■
Overview of Creating Topologies (page 822)
■ Loading or Unloading Topologies (page 906)
■ Querying a Topology (page 1348)
■ Displaying and Editing Object Data for a Drawing Object (page 1068)
■ Viewing Properties and Attributes of Drawing Objects (page 1145)
■ Viewing Topology Statistics (page 915)
NOTE This procedure is for drawing objects only. There is no equivalent for
geospatial feature data.
To view topology object data
1 Click Tools tab ➤ Map Edit panel ➤ Edit Object Data.
2 Select the object.
3 In the
Edit Object Data dialog box (page 1795), view the topology data.
If the topology data is not displayed, select a topology table from the
Table list. The topology tables start with the letters "TPM."
To view and edit the properties of topology objects in the Properties palette
1 Click View tab ➤ Palettes panel ➤ Properties.
2 Select the object.
3 In the Properties palette, under the Topo group, view the topology
properties.
For example, if you choose a link in a network topology, you can see the
type object you selected, information about the start and end nodes, flow
direction, direct resistance, and reverse resistance.
914 | Chapter 6 Creating and Editing Data