2011

To add a polygon to a polygon topology using existing linework
1 Open the drawing where the polygon topology was created and load the
topology.
To add a polygon to a polygon topology, the current drawing must be
the drawing where the topology was created.
2 Do one of the following:
■ In Map Explorer, right-click the topology name. Click Add Polygon.
■ Type mapap on the command line.
3 In the map, select the border objects of the polygons to add.
4 Press Enter when you finish selecting polygons.
5 If you have blocks defined in the drawing, you are prompted to specify
a block to use for the centroid. Press Enter to use ACAD_POINT, or type
a block name and press Enter.
To add a polygon to a polygon topology by creating new linework
1 Open the drawing where the polygon topology was created and load the
topology.
2 On the command line, type MAPIL.
3 When prompted, specify the location for a new link. The link must define
a polygon.
Quick Reference
MAPAP
Adds a polygon to a polygon topology
MAPAPCommand Line
In Map Explorer, right-click a polygon
topology ➤ Add Polygon
Task Pane
MAPIL
Inserts a link in a topology
884 | Chapter 6 Creating and Editing Data