2011

Table Of Contents

2 Select the style in the Display Library.

3 Drag it onto the drawing layer to style in the Display Manager.

To turn off style referencing

1 In

Display Manager (page 2060), click the style for which to turn off

referencing.

2 If the Properties palette is not already displayed, right-click the style.

Click Properties.

3 On the Display tab of the Properties palette, under Style, click the box

next to Reference and select No.

NOTE Once you turn off referencing for a style, you cannot turn it back on.

Creating and Modifying a Display Manager Scale Threshold

You can define different styles at different scale thresholds.

Example: Turn on the display of road names only when the drawing scale

factor is below 1:5000

NOTE This functionality is for drawing objects only. To use scale ranges with

geospatial features, see

Defining Scale Ranges (page 643).

Referenced Styles

To display a layer the same way at multiple scale thresholds, save the styles

to the Library. For each new scale threshold, reference the style in the Library.

Any changes you make to the style at one scale threshold are reflected at the

other scale thresholds.

Turn off referencing for the styles that change from one scale threshold to the

next.

Example: Reference the Library Style for the Road layer at all scale thresholds

except when you are zoomed out. For that scale threshold, turn off referencing

so you can change the display of roads when you zoom out.