2011

■ Allowing Labels to Obscure Points
(page 1096)
NOTE This procedure is for geospatial features only. If you are styling a drawing
layer, see
Creating a Style (page 658).
To apply styles to lines
1 In Display Manager (page 2060), right-click a feature layer that contains
lines.
2 Click Edit Style.
3 In the Style Editor, under Scale Ranges, select the scale range to style.
For more information about scale ranges, see Defining Scale Ranges (page
643).
4 In the Line Style area for the selected scale range, click the box under
Style.
5 In the Style Line dialog box (page 1636), select the Apply Styles To The Line
check box.
6 To style a single line, do the following:
■ For Units (Device Space), select the type of units to measure line
thickness.
Lines are specified in Device Space units.
■ Use the lists to specify polyline thickness, color, and pattern.
NOTE Select 0 thickness to draw the line as thinly as possible.
7 To build a composite line, do the following:
■ Click Create Composite Lines to expand the Style Line dialog box.
■ Style the first line in the composite.
■ Click New to add a new component to the line.
■ Style the new component as desired.
■ Control the position of the selected component in the overall
composite line by clicking the up and down arrows.
8 Click OK.
Styling Line Features | 649