2011

5 In the Style Point dialog box (page 1637), select the Style A Point Symbol
check box.
6 For Symbol, click
.
7 In the Select A Symbol dialog box, specify a symbol library and a symbol.
Click OK.
NOTE When creating a block for use as a symbol the Edge color applies to
any entities that are defined as ByBlock. The Fill color applies to any entities
that are defined as ByLayer.
8 For Size Context, specify the type of units:
■ Select Device Space to specify symbol widths and heights in screen
units. Available units are Points, Inches, Millimeters, or Centimeters.
■ Select Map Space to specify symbol widths and heights in Mapping
Coordinate System (MCS) units. Available units are Inches, Feet, Yards,
Miles, Millimeters, Centimeters, Meters, and Kilometers.
9 For Units, select the type of units to use.
10 For Width, enter the symbol width or specify the width using a number
expression.
For more information, see the Creating Numeric Expressions.
11 For Height, enter the symbol height or specify the height using a number
expression.
For more information, see the Creating Numeric Expressions.
12 To maintain width-to-height proportions when you change the width
or height of the symbol, select the Maintain Aspect Ratio check box.
13 To change the fill and edge colors of the symbol, use the Fill Color and
Edge Color lists.
If you do not change the colors, the default colors from the symbol are
used.
14 For Rotation, do one of the following:
■ Select a value from the drop-down list.
■ Click Any Angle. Specify the angle using the slider or enter an angle
in the box. Click OK.
Styling Point Features | 647