2011

AutoCAD Map 3D always uses this optimization feature and applies it to
the draw order of all objects, not just to images.
■ Image selection
You can set an option to draw hatch marks over a selected image. Click
➤ Options. Select the Display tab. Under Display Performance, set
Highlight Raster Image Frame Only to off.
If Highlight Raster Image Frame Only is off, when you select an image, it
rises to the top of the display order, obscuring any vectors that cross it.
Use the REGEN command to restore the proper display order.
NOTE For images you added with Data Connect (page 2059), use Display Manager
(page 2060) to change the draw order. See Organizing Layers in Your Map (page
300).
See also:
■
Overview of Adding Rasters and Surfaces (page 437)
■ Using Other Raster Image Formats (page 453)
NOTE For images you added with Data Connect (page 2059), use Display Manager
(page 2060) to change the draw order. See Organizing Layers in Your Map (page
300).
To change the draw order of images
1 Click Insert tab ➤ Image panel ➤ Image Management.
2 In the Image Management dialog box (page 1875), select an image name
and drag it up or down in the Image column.
The current draw order is indicated in the Image column. The top image
in the list is drawn on top of all the other images and is the last drawn.
The last image in the list is drawn beneath any images that may overlap
it.
To change the draw order of images and objects
1 Select the image.
Using Other Raster Image Formats | 477