2011

6 To view or modify the image correlation data, select Modify Correlation.
7 Click Open.
If Modify Correlation is not selected or if you are inserting more than
one image, the Image Correlation dialog box does not appear and the
images are inserted using their default correlation information. AutoCAD
Map 3D searches in this order for correlation information:
■ World file
■ Resource file (.res extension)
■ Tab file (.tab file)
■ Image file
■ Settings from the Raster Extension Options dialog box
If you selected Modify Correlation, the Image Correlation dialog box
displays. The image frame, which indicates where the image will be
inserted, is displayed in your drawing.
TIP If you cannot see the image frame, use the ZOOM or PAN commands
to bring it into view while leaving the Image Correlation dialog box open.
8 Do one of the following:
■ To insert the image using the current settings, click OK.
■ To use a different correlation source (page 464), select the correlation
source from the Correlation Source list.
■ To change the insertion point, rotation, or scale, type the appropriate
values. For more information, see To correlate an image during
insertion
(page 464).
■ To resize or orient the image to existing vectors or images, click the
image frame while the Image Correlation dialog box is open.
■ To define the insertion point, rotation, and scale onscreen, select the
Insertion tab. Click Pick. For more information, see To adjust the
image frame manually during insertion
(page 465).
■ To specify the density units for the image, select the Source tab. Select
Units (page 469).
9 Click OK.
Using Other Raster Image Formats | 461