2011

Where XXX is the code you want to send to the driver. Add the line to the
appropriate section of the MapExport.ini file. Incorrect tags will have
unpredictable results.
Location of the .ini File
When exporting, AutoCAD Map 3D looks first for the .ini file in the current
directory. If no .ini file is there, it uses the .ini file in the C:\Documents and
Settings\All Users\Application Data\Autodesk\AutoCAD Map 3D 2011\R18.1
folder. To always use the same settings, do not create additional .ini files.
Changing Font, Line Style, Line Weight, or Justification
You can set several formatting options in the mapforeignfileproperties.ini file.
Use the [DGN_V7_FieldMappping] or [DGN_V8_FieldMapping] section to
enable a particular formatting option:
■ igds_font=MapFont
■ igds_justification=MapJustification
■ igds_weight=MapLineWeight
■ igds_style=MapLineStyle
DGN Fonts
Use the [DGN_V7_Font] section or [DGN_V8_Font] section to map DGN font
numbers to textstyles that you've defined.
DGN Line Styles
Use the [DGN_V7_LineStyle] or [DGN_V8_LineStyle] section to map DGN line
styles to line styles loaded in the AutoCAD Map 3D drawing.
DGN Line Weight
Use the [DGN_V7_LineWeight] or [DGN_V8_LineWeight] section to map
DGN lineweights to allowable AutoCAD Map 3D lineweight values.
The DGN line weight range is 0-31. AutoCAD Map 3D line weights are in
100ths of a millimeter and only the following values are supported: 0, 5, 9,
13, 15, 18, 20, 25, 30, 35, 40, 50, 53, 60, 70, 80, 90, 100, 106, 120, 140, 158,
200, 211, -1, -2 and -3. The AutoCAD Map 3D values -1, -2, and -3 indicate
ByLayer, ByBlock, and by line weight default respectively.
DGN Justification
Customizing and Automating Import and Export | 267