2011

■ Lettering Scheme: specify the lettering scheme for MGRS coordinates.
Use AA (MGRS-New) for the WSG84 datum. Use AL (MGRS-Old) for
older datums.
■ Digitization Location: For the digitization location within a given
MGRS square, specify left top, center top, right top, left center, center,
right center, left bottom, center bottom, or right bottom.
4 Click OK.
Quick Reference
MAPTRACKCS
Tracks the coordinates of the cursor in any coordinate system
Analyze menu ➤ Track Coordinate Sytem.
Menu
Track Coordinates
Icon
MAPTRACKCSCommand Line
In Map Explorer, right-click Current Drawing ➤ Track
Coordinates
Task Pane
Setting Coordinate Geometry Options
You can set the following coordinate geometry options:
■ If North on your map is not aligned with the Y axis, specify the angle for
North.
■ If your COGO information sometimes includes elevation information, set
the COGO commands to prompt for 3D data. If you never include 3D data,
you can turn off this prompt.
■ Specify units of measure for your coordinate geometry input. For Linear
Units, select US Feet, International Feet, Meters, or Chains. For Angle
Format, select Decimal Degrees, Degrees/Minutes/Seconds, Grads, Radians,
or Surveyor’s Units.
■ If azimuth bearings on your map are measured relative to South, set the
azimuth base to South. Otherwise, leave it set to North.
Setting Coordinate Geometry Options | 233