2011

Current Key View Definition List
Display the drawing window width conditions defined in this drawing.
Edit
Copy the selected condition to the bottom of the screen, where you can
change the width and add or remove layers.
Delete
Delete the selected condition.
Clear List
Delete all conditions.
Width > box
Enter the width to define.
The width is the distance across the drawing window as measured in drawing
units. The more you zoom in, the smaller this number is.
TIP Before you use the ADEDEFKEYVIEW command, use the DISTANCE
command to measure the width of the window at the zoom magnifications you
want to define.
Show Only These Layers box
Specify the layers to display when the drawing window displays a greater
width than specified in the Width box. Separate layer names with a comma.
Click Layers to select from a list of layers in the active drawings. You can
use wild-card characters to specify a set of layers.
Layers
Display a list of layers in the active drawings. Select the layers to display at
the specified window width.
Whenever the number of drawing units displayed in the drawing window
becomes greater than a defined key view condition, AutoCAD Map 3D displays
the layers specified for that condition.
When you use key views, AutoCAD Map 3D previews the specified layers from
source drawings. Objects already in the current drawing are not affected by
key views.
2018 | Chapter 39 Viewing Dialog Boxes