2011

Filters
Displays the Drawing Set Display Filter dialog box, where you can create or
change the filters for file names and descriptions.
Zoom to the Extents of Selected Drawings
Zoom the current drawing to the extents of the selected source drawings.
Zoom Drawing Extents dialog box
Use this dialog box to zoom to the extents of a set of drawings.
To zoom to the extents of selected drawings (page 745)
Click Map Setup tab ➤ Map panel ➤ Zoom Drawing Extents.
NOTE You can also zoom to the extents of the current drawing from the View
tab on the ribbon, or to the extents of a specific Display Manager layer by
right-clicking the layer and clicking Zoom To Extents.
Select the drawings you want. Click OK. The display zooms to the extents of
the selected drawings. Drawing extents are the bounds of the area occupied
by objects.
Select Active Drawings to Zoom list
Lists all active drawings attached to the current drawing.
Select the drawings to use to define the extents.
Select All
Highlight all drawings in the list.
Clear All
Remove the highlighting from all drawings in the list.
Filter
Select Filter to turn the current drawing filter on or off.
When the filter is on, only drawings that match the filter are displayed. If
the parent drawing of a nested drawing is filtered, the nested drawing is
not displayed, even if it matches the filter.
2014 | Chapter 39 Viewing Dialog Boxes