2011

Finish
Perform the topology overlay using the current settings. The Finish is
available after you select the overlay topology and enter a valid topology
name for the resulting topology.
Topology Overlay Analysis - Output Attributes dialog box
NOTE This functionality applies only to drawing objects. To do an overlay analysis
for geospatial feature data, see
Overlaying Two Feature Sources (page 1309).
Use this dialog box to select the data to attach to the result topology when
performing a topology overlay.
To find sliver polygons when overlaying two topologies (page 843)
Click Analyze tab ➤ Drawing Object panel ➤ Object Overlay.
The selected fields and columns are incorporated into a new object data table
that is attached to the result topology.
Source Attributes for New Topology
To copy data from the source topology to the result topology, click
Expression Builder. In the Expression Chooser dialog box, select the object
data fields or external database columns to copy.
Overlay Attributes for New Topology
To copy data from the overlay topology to the result topology, click
Expression Builder. In the Expression Chooser dialog box, select the object
data fields or external database columns to copy.
Expression Builder s
Click to display the Expression Chooser dialog box, where you can select
the data to include in the resulting topology.
New Object Data Table Name
Enter a name for the object data table that will store the data in the new
topology. The Table Name should be a new name.
2006 | Chapter 38 Topology Dialog Boxes