2011

Create Topology
Create a new topology using the results of the analysis.
Name
Enter a unique name for the new topology. Topology names can contain
letters, numbers, and the underscore and hyphen characters.
Description
Enter a description for the new topology.
Load
Use settings that you previously saved.
Save
Save the current settings so you can use them again.
Cancel
Close the dialog box without performing the network analysis.
Back
Display the previous dialog box.
Next
Disabled because this is the last dialog box in the list.
Finish
Perform the network analysis using the current settings. For a shortest path
trace, the Finish is available after you select a start point and an end point.
For best route analysis, the Finish is available after you select a start point
and at least one visit point. For a flood trace, the Finish is available after
you select a start point.
Network Topology Analysis - Resistance and Direction dialog
box
NOTE This functionality applies only to drawing objects.
Network Topology Analysis - Resistance and Direction dialog box | 1981